PC CHIPS A15G (V2.0) Guide de l'utilisateur télécharger pdf (Page 11)

Motherboard User’s Guide

CPU Installation Procedure

Follow these instructions to install the CPU:

1 Unhook the locking lever of the CPU socket.

Pull the locking lever away from the socket

and raising it to the upright position.

2 Match the pin1 corner marked as the beveled

edge on the CPU with the pin1 corner on the

socket. Insert the CPU into the socket. Do

not use force.

3 Push the locking lever down and hook it un-

der the latch on the edge of socket.

4 Apply thermal grease to the top of the CPU.

5 Install the cooling fan/heatsink unit onto the

CPU, and secure them all onto the socket base.

6 Plug the CPU fan power cable into the CPU

fan connector (CPU_FAN) on the

motherboard.

Note: To achieve better airflow rates and heat dissipation, we suggest that you

use a high quality fan with 4800 rpm at least. CPU fan and heatsink

installation procedures may vary with the type of CPU fan/heatsink supplied.

The form and size of fan/heatsink may also vary.

Installing the Processor

This motherboard has an AM2+/AM2 processor socket. When choosing a proces-

sor, consider the performance requirements of the system. Performance is based on

the processor design, the clock speed and system bus frequency of the processor,

and the quantity of internal cache memory and external cache memory.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

Pas de commentaire

PC CHIPS A15G (V2.0) Guide de l'utilisateur Page 11