PC CHIPS P25G (V3.0) Guide de l'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
20
Motherboard User’s Guide
Advanced Setup Page
This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
Quick Boot
If you enable this item, the system starts up more quickly be elimination some
of the power on test routines.
1st Boot Device/2nd Boot Device/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
Try Other Boot Device
If you enable this item, the system will also search for other boot devices if it
fails to find an operating system from the first two locations.
BootUp Num-Lock
This item determines if the Num Lock key is active or inactive at system start-
up time.
Boot To OS/2> 64MB
Enable this item if you are booting the OS/2 operating system and you have
more than 64MB of system memory installed.
AGP Aperture Size
This item defines the size of aperture if you use a graphic adapter.
DRAM Timing
This item allows you to enable or disable the DRAM timing defined by the
Serial Presence Detect electrical.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Advanced Setup
Help Item
Allows BIOS to skip certain
tests while booting. This will
decrease the time needed
to boot the system.
Quick Boot
1st Boot Device
2nd Boot Device
3rd Boot Device
Try Other Boot Device
Bootup Num-Lock
Boot To OS/2 > 64 MB
AGP Aperture Size
DRAM Timing
DRAM CAS# Latency
DRAM Bank Interleave
Auto Detect DIMM/PCI Clk
Spread Spectrum
Hyper Threading Function
Max CPUID Value Limit
Execute Disable Bit
DRAM Driving
Enabled
PM-IC35L040AVVN07
SS-Pioneer DVD-R0
1st Floppy Drive
Yes
On
No
64 MB
Manual
By SPD
4-way
Enabled
Disabled
Ensabled
Disabled
Enabled
Normal
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Commentaires sur ces manuels

Pas de commentaire