PC CHIPS M863G (V1.5A) Spécifications télécharger pdf (Page 37)

Follow the steps below to install an AGP/CNR/PCI expansion

card.

1. Locate the AGP, CNR or PCI slots on the motherboard.

2. Remove the blanking plate of the slot from the system chassis.

3. Install the edge connector of the expansion card into the slot.

Ensure the edge connector is correctly seated in the slot.

4. Secure the metal bracket of the card to the system chassis with

a screw.

8X AGP Slot

You can install a graphics adapter that supports the 8X AGP

specification and has an 8X AGP edge connector in the AGP slot.

CNR Slot

You can install the CNR (Communications and Networking Riser)

cards in this slot, including LAN, Modem, and Audio functions.

PCI Slots

You can install the 32-bit PCI interface expansion cards in the

slots.

AGP1

CNR1

PCI2 PCI1

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

PC CHIPS M863G (V1.5A) Spécifications Page 37