PC CHIPS M863G (V1.5A) Spécifications télécharger pdf (Page 35)

Install Other Devices

Install and connect any other devices in the system following the

steps below.

Floppy Disk Drive

The motherboard ships with a floppy disk drive cable that can

support one or two drives. Drives can be 3.5” or 5.25” wide, with

capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.

Install your drives and connect power from the system power

supply. Use the cable provided to connect the drives to the floppy

disk drive connector FDC1.

IDE Devices

IDE devices include hard disk drives, high-density diskette drives,

and CD-ROM or DVD-ROM drives, among others.

The motherboard ships with an IDE cable that can support one or

two IDE devices. If you connect two devices to a single cable, you

must configure one of the drives as Master and one of the drives as

Slave. The documentation of the IDE device will tell you how to

configure the device as a Master or Slave device. The Master

device connects to the end of the cable.

Install the device(s) and connect power from the system power

supply. Use the cable provided to connect the device(s) to the

Primary IDE channel connector IDE1 on the motherboard.

If you want to install more IDE devices, you can purchase a second

IDE cable and connect one or two devices to the Secondary IDE

FDC1

IDE1 IDE2

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Pas de commentaire

PC CHIPS M863G (V1.5A) Spécifications Page 35